/* [<][>][^][v][top][bottom][index][help] */
DEFINITIONS
This source file includes following definitions.
- scull_p_open
- scull_p_release
- scull_p_read
- scull_getwritespace
- spacefree
- scull_p_write
- scull_p_poll
- scull_p_fasync
- scullp_proc_offset
- scull_read_p_mem
- scull_p_setup_cdev
- scull_p_init
- scull_p_cleanup
/*
* pipe.c -- fifo driver for scull
*
* Copyright (C) 2001 Alessandro Rubini and Jonathan Corbet
* Copyright (C) 2001 O'Reilly & Associates
*
* The source code in this file can be freely used, adapted,
* and redistributed in source or binary form, so long as an
* acknowledgment appears in derived source files. The citation
* should list that the code comes from the book "Linux Device
* Drivers" by Alessandro Rubini and Jonathan Corbet, published
* by O'Reilly & Associates. No warranty is attached;
* we cannot take responsibility for errors or fitness for use.
*
*/
#include <linux/module.h>
#include <linux/moduleparam.h>
#include <linux/kernel.h> /* printk(), min() */
#include <linux/slab.h> /* kmalloc() */
#include <linux/fs.h> /* everything... */
#include <linux/proc_fs.h>
#include <linux/errno.h> /* error codes */
#include <linux/types.h> /* size_t */
#include <linux/fcntl.h>
#include <linux/poll.h>
#include <linux/cdev.h>
#include <asm/uaccess.h>
#include "scull.h" /* local definitions */
struct scull_pipe {
wait_queue_head_t inq, outq; /* read and write queues */
char *buffer, *end; /* begin of buf, end of buf */
int buffersize; /* used in pointer arithmetic */
char *rp, *wp; /* where to read, where to write */
int nreaders, nwriters; /* number of openings for r/w */
struct fasync_struct *async_queue; /* asynchronous readers */
struct semaphore sem; /* mutual exclusion semaphore */
struct cdev cdev; /* Char device structure */
};
/* parameters */
static int scull_p_nr_devs = SCULL_P_NR_DEVS; /* number of pipe devices */
int scull_p_buffer = SCULL_P_BUFFER; /* buffer size */
dev_t scull_p_devno; /* Our first device number */
module_param(scull_p_nr_devs, int, 0); /* FIXME check perms */
module_param(scull_p_buffer, int, 0);
static struct scull_pipe *scull_p_devices;
static int scull_p_fasync(int fd, struct file *filp, int mode);
static int spacefree(struct scull_pipe *dev);
/*
* Open and close
*/
static int scull_p_open(struct inode *inode, struct file *filp)
{
struct scull_pipe *dev;
dev = container_of(inode->i_cdev, struct scull_pipe, cdev);
filp->private_data = dev;
if (down_interruptible(&dev->sem))
return -ERESTARTSYS;
if (!dev->buffer) {
/* allocate the buffer */
dev->buffer = kmalloc(scull_p_buffer, GFP_KERNEL);
if (!dev->buffer) {
up(&dev->sem);
return -ENOMEM;
}
}
dev->buffersize = scull_p_buffer;
dev->end = dev->buffer + dev->buffersize;
dev->rp = dev->wp = dev->buffer; /* rd and wr from the beginning */
/* use f_mode,not f_flags: it's cleaner (fs/open.c tells why) */
if (filp->f_mode & FMODE_READ)
dev->nreaders++;
if (filp->f_mode & FMODE_WRITE)
dev->nwriters++;
up(&dev->sem);
return nonseekable_open(inode, filp);
}
static int scull_p_release(struct inode *inode, struct file *filp)
{
struct scull_pipe *dev = filp->private_data;
/* remove this filp from the asynchronously notified filp's */
scull_p_fasync(-1, filp, 0);
down(&dev->sem);
if (filp->f_mode & FMODE_READ)
dev->nreaders--;
if (filp->f_mode & FMODE_WRITE)
dev->nwriters--;
if (dev->nreaders + dev->nwriters == 0) {
kfree(dev->buffer);
dev->buffer = NULL; /* the other fields are not checked on open */
}
up(&dev->sem);
return 0;
}
/*
* Data management: read and write
*/
static ssize_t scull_p_read (struct file *filp, char __user *buf, size_t count,
loff_t *f_pos)
{
struct scull_pipe *dev = filp->private_data;
if (down_interruptible(&dev->sem))
return -ERESTARTSYS;
while (dev->rp == dev->wp) { /* nothing to read */
up(&dev->sem); /* release the lock */
if (filp->f_flags & O_NONBLOCK)
return -EAGAIN;
PDEBUG("\"%s\" reading: going to sleep\n", current->comm);
if (wait_event_interruptible(dev->inq, (dev->rp != dev->wp)))
return -ERESTARTSYS; /* signal: tell the fs layer to handle it */
/* otherwise loop, but first reacquire the lock */
if (down_interruptible(&dev->sem))
return -ERESTARTSYS;
}
/* ok, data is there, return something */
if (dev->wp > dev->rp)
count = min(count, (size_t)(dev->wp - dev->rp));
else /* the write pointer has wrapped, return data up to dev->end */
count = min(count, (size_t)(dev->end - dev->rp));
if (copy_to_user(buf, dev->rp, count)) {
up (&dev->sem);
return -EFAULT;
}
dev->rp += count;
if (dev->rp == dev->end)
dev->rp = dev->buffer; /* wrapped */
up (&dev->sem);
/* finally, awake any writers and return */
wake_up_interruptible(&dev->outq);
PDEBUG("\"%s\" did read %li bytes\n",current->comm, (long)count);
return count;
}
/* Wait for space for writing; caller must hold device semaphore. On
* error the semaphore will be released before returning. */
static int scull_getwritespace(struct scull_pipe *dev, struct file *filp)
{
while (spacefree(dev) == 0) { /* full */
DEFINE_WAIT(wait);
up(&dev->sem);
if (filp->f_flags & O_NONBLOCK)
return -EAGAIN;
PDEBUG("\"%s\" writing: going to sleep\n",current->comm);
prepare_to_wait(&dev->outq, &wait, TASK_INTERRUPTIBLE);
if (spacefree(dev) == 0)
schedule();
finish_wait(&dev->outq, &wait);
if (signal_pending(current))
return -ERESTARTSYS; /* signal: tell the fs layer to handle it */
if (down_interruptible(&dev->sem))
return -ERESTARTSYS;
}
return 0;
}
/* How much space is free? */
static int spacefree(struct scull_pipe *dev)
{
if (dev->rp == dev->wp)
return dev->buffersize - 1;
return ((dev->rp + dev->buffersize - dev->wp) % dev->buffersize) - 1;
}
static ssize_t scull_p_write(struct file *filp, const char __user *buf, size_t count,
loff_t *f_pos)
{
struct scull_pipe *dev = filp->private_data;
int result;
if (down_interruptible(&dev->sem))
return -ERESTARTSYS;
/* Make sure there's space to write */
result = scull_getwritespace(dev, filp);
if (result)
return result; /* scull_getwritespace called up(&dev->sem) */
/* ok, space is there, accept something */
count = min(count, (size_t)spacefree(dev));
if (dev->wp >= dev->rp)
count = min(count, (size_t)(dev->end - dev->wp)); /* to end-of-buf */
else /* the write pointer has wrapped, fill up to rp-1 */
count = min(count, (size_t)(dev->rp - dev->wp - 1));
PDEBUG("Going to accept %li bytes to %p from %p\n", (long)count, dev->wp, buf);
if (copy_from_user(dev->wp, buf, count)) {
up (&dev->sem);
return -EFAULT;
}
dev->wp += count;
if (dev->wp == dev->end)
dev->wp = dev->buffer; /* wrapped */
up(&dev->sem);
/* finally, awake any reader */
wake_up_interruptible(&dev->inq); /* blocked in read() and select() */
/* and signal asynchronous readers, explained late in chapter 5 */
if (dev->async_queue)
kill_fasync(&dev->async_queue, SIGIO, POLL_IN);
PDEBUG("\"%s\" did write %li bytes\n",current->comm, (long)count);
return count;
}
static unsigned int scull_p_poll(struct file *filp, poll_table *wait)
{
struct scull_pipe *dev = filp->private_data;
unsigned int mask = 0;
/*
* The buffer is circular; it is considered full
* if "wp" is right behind "rp" and empty if the
* two are equal.
*/
down(&dev->sem);
poll_wait(filp, &dev->inq, wait);
poll_wait(filp, &dev->outq, wait);
if (dev->rp != dev->wp)
mask |= POLLIN | POLLRDNORM; /* readable */
if (spacefree(dev))
mask |= POLLOUT | POLLWRNORM; /* writable */
up(&dev->sem);
return mask;
}
static int scull_p_fasync(int fd, struct file *filp, int mode)
{
struct scull_pipe *dev = filp->private_data;
return fasync_helper(fd, filp, mode, &dev->async_queue);
}
/* FIXME this should use seq_file */
#ifdef SCULL_DEBUG
static void scullp_proc_offset(char *buf, char **start, off_t *offset, int *len)
{
if (*offset == 0)
return;
if (*offset >= *len) { /* Not there yet */
*offset -= *len;
*len = 0;
}
else { /* We're into the interesting stuff now */
*start = buf + *offset;
*offset = 0;
}
}
static int scull_read_p_mem(char *buf, char **start, off_t offset, int count,
int *eof, void *data)
{
int i, len;
struct scull_pipe *p;
#define LIMIT (PAGE_SIZE-200) /* don't print any more after this size */
*start = buf;
len = sprintf(buf, "Default buffersize is %i\n", scull_p_buffer);
for(i = 0; i<scull_p_nr_devs && len <= LIMIT; i++) {
p = &scull_p_devices[i];
if (down_interruptible(&p->sem))
return -ERESTARTSYS;
len += sprintf(buf+len, "\nDevice %i: %p\n", i, p);
/* len += sprintf(buf+len, " Queues: %p %p\n", p->inq, p->outq);*/
len += sprintf(buf+len, " Buffer: %p to %p (%i bytes)\n", p->buffer, p->end, p->buffersize);
len += sprintf(buf+len, " rp %p wp %p\n", p->rp, p->wp);
len += sprintf(buf+len, " readers %i writers %i\n", p->nreaders, p->nwriters);
up(&p->sem);
scullp_proc_offset(buf, start, &offset, &len);
}
*eof = (len <= LIMIT);
return len;
}
#endif
/*
* The file operations for the pipe device
* (some are overlayed with bare scull)
*/
struct file_operations scull_pipe_fops = {
.owner = THIS_MODULE,
.llseek = no_llseek,
.read = scull_p_read,
.write = scull_p_write,
.poll = scull_p_poll,
.ioctl = scull_ioctl,
.open = scull_p_open,
.release = scull_p_release,
.fasync = scull_p_fasync,
};
/*
* Set up a cdev entry.
*/
static void scull_p_setup_cdev(struct scull_pipe *dev, int index)
{
int err, devno = scull_p_devno + index;
cdev_init(&dev->cdev, &scull_pipe_fops);
dev->cdev.owner = THIS_MODULE;
err = cdev_add (&dev->cdev, devno, 1);
/* Fail gracefully if need be */
if (err)
printk(KERN_NOTICE "Error %d adding scullpipe%d", err, index);
}
/*
* Initialize the pipe devs; return how many we did.
*/
int scull_p_init(dev_t firstdev)
{
int i, result;
result = register_chrdev_region(firstdev, scull_p_nr_devs, "scullp");
if (result < 0) {
printk(KERN_NOTICE "Unable to get scullp region, error %d\n", result);
return 0;
}
scull_p_devno = firstdev;
scull_p_devices = kmalloc(scull_p_nr_devs * sizeof(struct scull_pipe), GFP_KERNEL);
if (scull_p_devices == NULL) {
unregister_chrdev_region(firstdev, scull_p_nr_devs);
return 0;
}
memset(scull_p_devices, 0, scull_p_nr_devs * sizeof(struct scull_pipe));
for (i = 0; i < scull_p_nr_devs; i++) {
init_waitqueue_head(&(scull_p_devices[i].inq));
init_waitqueue_head(&(scull_p_devices[i].outq));
init_MUTEX(&scull_p_devices[i].sem);
scull_p_setup_cdev(scull_p_devices + i, i);
}
#ifdef SCULL_DEBUG
create_proc_read_entry("scullpipe", 0, NULL, scull_read_p_mem, NULL);
#endif
return scull_p_nr_devs;
}
/*
* This is called by cleanup_module or on failure.
* It is required to never fail, even if nothing was initialized first
*/
void scull_p_cleanup(void)
{
int i;
#ifdef SCULL_DEBUG
remove_proc_entry("scullpipe", NULL);
#endif
if (!scull_p_devices)
return; /* nothing else to release */
for (i = 0; i < scull_p_nr_devs; i++) {
cdev_del(&scull_p_devices[i].cdev);
kfree(scull_p_devices[i].buffer);
}
kfree(scull_p_devices);
unregister_chrdev_region(scull_p_devno, scull_p_nr_devs);
scull_p_devices = NULL; /* pedantic */
}